Automotive engine parts ultrasonic cleaning machine CCS-1066NS

Main parameters of ultrasonic cleaning machine
1. Frequency: ≥20KHz, can be divided into low frequency, intermediate frequency, high frequency 3 segments.
2. Cleaning medium: ultrasonic cleaning, generally two types of cleaning agents: chemical solvents, water-based cleaning agents, etc. The chemical action of the cleaning medium can accelerate the ultrasonic cleaning effect, the ultrasonic cleaning is a physical action, and the two effects are combined to fully and thoroughly clean the object.
3. Power density: power density = transmission power (W) / emission area (cm2) is usually ≥ 0.3W / cm2, the higher the power density of the ultrasonic wave, the stronger the cavitation effect, the faster the speed, the better the cleaning effect. However, for precision, high-surface finish objects, long-term high-power density cleaning can cause "cavitation" corrosion on the surface of the object.
4. Ultrasonic frequency: The lower the ultrasonic frequency, the easier the cavitation generated in the liquid, the greater the force generated, and the stronger the effect, suitable for the initial washing of the workpiece (rough, dirty). The high frequency makes the ultrasonic direction strong, which is suitable for fine object cleaning.
5. Cleaning temperature: Generally speaking, the cavitation effect of ultrasonic wave is best at 30 °C - 40 °C. The higher the temperature of the cleaning agent, the more significant the effect. Generally, when ultrasonic waves are actually applied, an operating temperature of 50 ° C to 70 ° C is employed.
The cleaning products of this washing machine are: carburetor, cylinder block, steel ring, tire, front axle, rear axle, swing arm, ball head, coil spring, valve body, drive shaft, hub, crankshaft, bearing bush, transmission Gears, spark plugs, grease nipples, pressure plates, clutch plates, vacuum boosters, pistons, headlights, door mirrors, sensors, shock absorbers, pumps, water pipes, radiators, air conditioners, motors, compressors, etc. Cleaning of oil, iron filings and dust during the process.
In the process of automobile manufacturing and maintenance, all kinds of auto parts must be cleaned. The manual operation is not only inefficient, but also the cleaning quality is not good. The ultrasonic cleaning machine of the car not only cleans quickly, but also can be used in tens of seconds to several minutes. The cleaning is completed, and the cleaning quality is high, the parts will not be damaged, and the problem of cleaning the spare parts of the automobile is solved, which will play an extremely important role in the automobile industry.