Fully Automatic Smart Clean Ultrasonic Cleaner Non Toxic Customized Power Supply

^{Fully Automatic Smart Clean Ultrasonic Cleaner Non Toxic Customized Power Supply}

<sup>Test machine, acceptance, warranty
I. Installation and test conditions
01. After the equipment is assembled, the equipment is first commissioned using the substrate or product of the demand side.
02. There are inlet and outlet pipes with valves at less than 2 meters around the installation position of the equipment.
03. There is a 380V AC three-phase power supply with switch at less than 2 meters around the installation position of the equipment.
04. There is enough ventilation system at the top of the equipment.</sup>

<sup>Second, the acceptance conditions
01. After the equipment arrives at the customer's designated site, the customer must meet the installation conditions of the Equipment Specification. If the customer cannot meet the installation conditions (water, electricity, gas, inlet and exhaust system), the installation and commissioning will exceed 45 days. Acceptance does not require the consent of the buyer and is not subject to other contractual restrictions.
02. After installation and commissioning of this equipment, the customer or the buyer shall assist in the acceptance test within 30 days; the equipment is independently operated and the equipment is not affected by the installation and commissioning of other related equipment.
03. Acceptance criteria are generally based on industry-wide standards or agreed by both parties.
04. This equipment is not responsible for the normal loss of the test machine or trial production.
Third, the warranty</sup>

^{Warranty period: Bad materials and parts that are warranted by the equipment during the 12 months after installation and acceptance of the equipment}

^{Warranty project:
If the equipment is in normal operation and promises and performs regular maintenance and maintenance, if the abnormal result is caused by poor materials or components during the warranty period, the defective part will be repaired or replaced free of charge.
The scope of warranty is limited to the defective part of repair or replacement. Any damage caused by incidental or indirect damage is not covered by the warranty (loss due to stoppage or defective production due to bad).
Both the supplier and the buyer sign the "Maintenance Letter of Commitment" and perform it.}

^{Items not responsible for the warranty period
General consumables replacement (filter, bearing, O-ring, heater, liquid line)}

^{Normal maintenance: cleaning of the equipment, lubrication, normal inspection, screw fastening
Parts failure or damage caused by abnormal operating equipment
Part failure or damage caused by unauthorized modification or repair or use conditions outside the specification
Part failure or damage caused by end-of-life consumables}