High-power watch case strap degreasing and wax removal ultrasonic cleaning machine

Case and strap cleaning are mainly divided into two types. The first one is the cleaning of the watch strap of the product, that is, the cleaning of the watch we usually bring. The second is the cleaning of the oil and polishing wax produced by the factory in the production of the case and the strap. The first type of cleaning mainly has the following characteristics:
1, the number of personal cleaning should not be too much, easy to cause some damage to the watch strap.
2. In the process of cleaning up, no matter how careful, there will still be water seepage. If the watch body is filled with water because of cleaning the strap, it will not be worth the loss. If you are worried about such a situation, you should carry out professional cleaning work.
3. If the metal strap is wet (water, sweat, etc.) and is not handled, it is easy to rust. Metal rust or dirt is likely to smear out of the seams and even cause skin irritation. Therefore, after removing the table or water, remember to dry the seams with a cloth and put on. In addition, the diving watch can be washed with water after landing.
4, K gold material strap because of the soft material, it is easy to cause scratches when subjected to impact or improper touch, in addition, the traffic noise in the life, swimming pool chlorine or human sweat will make the K gold watch discolored. Keep the strap dry and carefully put it on, while the high-hardness titanium or high-tech ceramic watch should also be careful to avoid impact or drop. After all, hardness does not mean that it is invincible.
The second type of cleaning, that is, the oil stain produced in the production and the cleaning of the polishing wax. Ultrasonic cleaning is generally required, and a single-tank ultrasonic cleaning machine can be used simply. A complicated two-slot or three-slot or more can basically solve the problem. In the process of cleaning and polishing wax, it is necessary to pay special attention to the temperature must be reached at a water temperature of about 70-80 degrees for boiling, so as to achieve better cleaning efficiency.
CCS-1024NS single-tank cleaning machine is a good choice for cleaning polishing wax. Its parameters are as follows:
The inner groove body has the size: 600*400*400MM
The tank material is made of SUS 304 stainless steel plate with a thickness of 2MM;
The ultrasonic vibrator adopts the Japanese NTK brand shock crystal, each power is 50W, a total of 24 vibrators are installed, and the ultrasonic power is 1200W;
Equipped with a heating tube, heating power 1500W, temperature can be adjusted;
One drain valve is provided, which is made of SUS 304 material;
Designed with four casters, each wheel can bear more than 50KG;
It is equipped with a SUS304 stainless steel door panel and a stainless steel steel cover.