High Speed Wire Plating Equipment , Nickel Plating Machine Cutting Eco Friendly

^{High Speed Wire Plating Equipment , Nickel Plating Machine Cutting Eco Friendly}

<sup>Gold steel wire has many advantages:
1. High-speed cutting can be realized, the cutting speed can be increased by 2 times, and the time is naturally reduced. More work can be done per unit time, which is its biggest advantage.</sup>

^{2. Environmentally friendly production, the cutting process of gold steel wire only needs water or water-based cooling cleaning liquid, which can truly realize environmentally friendly production and manufacturing.}

^{However, the current diamond line technology also has many shortcomings, mainly:}

^{1. High cost, this is still a relatively new technology, has not yet reached the popularity, the main diamond line depends on imports, the supply of China's domestic company Jinang line is still relatively small, so the price is relatively high, the price of diamond material is relatively plated Copper galvanized materials are much higher.}

^{2. The line is too thick, resulting in a large loss of silicon wafer. The loss of the silicon wafer is directly related to the thickness of the cutting line, and the coarser the natural loss, the more. At present, the mainstream cutting line is ultra-fine cutting wire with a diameter of about 120um. The diameter of the diamond wire in practical applications is about 250um, which is more than twice that of ultra-fine cutting wire.}

^{3. There will be cut marks which will cause the conversion efficiency of the crystalline silicon cell to be low. Therefore, the current diamond wire is mainly used in the rough processing field of silicon wafers, for example, it has been applied in the silicon ingot fabrication. Superfine cutting wires are still used in the finer sectioning area.}

<sup>Transportation, installation and training of our company equipment:
A. Transportation: Our company is responsible for transportation;
B. Installation:
1. The demand side provides the water source, power source, and gas source necessary for the use of the equipment.
2. The buyer is responsible for the unloading of the equipment and the placement of the equipment in the plant.
3. The supplier installs the equipment free of charge at the site of the demanding factory.
C, training
During the installation, the seller provides retraining for the factory operator free of charge on site, including normal operation, maintenance, analysis of operational problems and emergency procedures.
D, providing one year of free technical support and services from the date of acceptance of the equipment. During the warranty period, the parts and components caused by non-human operation errors will be replaced free of charge, and the lifelong preferential technical service will continue to be provided after one year.</sup>